PPGI PVC Plastic Film Covering

What is PPGI PVC Plastic Film Covering?

PPGI (Pre-Painted Galvanized Iron) PVC plastic film covering refers to a process where PPGI sheets or coils, which are coated with a layer of paint, are additionally covered with a layer of PVC (Polyvinyl Chloride) plastic film. This process provides additional protection to the PPGI material, enhancing its durability and resistance to environmental factors such as corrosion, scratches, and UV radiation.

Here's a breakdown of the components involved:

1. PPGI:

PPGI refers to steel sheets or coils that have been coated with a layer of paint, typically a polyester or epoxy-based coating. This coating not only adds color to the material but also provides protection against rust and corrosion.

2.PPGI PVC Plastic Film:

PVC plastic film is a thin layer of polyvinyl chloride applied over the PPGI surface. PVC film offers further protection against scratches, abrasion, and environmental elements. It also enhances the aesthetic appeal of the material and provides additional resistance to chemical exposure.

The process of applying PVC plastic film to PPGI typically involves a lamination process where the film is carefully applied to the surface of the coated steel using heat and pressure. This ensures proper adhesion and a uniform covering.

PPGI with PVC plastic film covering finds applications in various industries including construction, automotive, and manufacturing where durable and aesthetically pleasing materials are required. It is commonly used for roofing, siding, cladding, and other exterior applications where protection against harsh weather conditions is essential. Additionally, the PVC film can come in different colors and textures, allowing for customization according to specific project requirements.

 

 

PPGI PVC Plastic Film Covering Specification 

Name	PPGI PVC Plastic Film Covering Prepainted galvanized steel/ PPGI / color-coated steel coil
PPGI Thickness	0.11mm-1.5mm
PPGI Width	600mm-1250mm, also available for strips 20mm-600mm
PPGI Color	According to RAL color or clients sample
Painting Thickness	PE paint top coating is 15-25micron, the back coating is 5-10micron if the back coating is double, the thickness can be 22micron
Zinc Coating	99% pure zinc coating, zinc weight from 60GSM to 275 GSM
Quality Control	SGS testing, test zinc coating thickness/PE coating thickness/ T testing, and others by every coil
PPGI Package	waterproof paper is inner packing, galvanized steel or coated steel sheet is outer packing, side guard plate, then wrapped by seven steel belts.
Certificate	ISO 9001:2008/BV/TUV

 

 

 

 

 

 

 

 

Attention in Transportation and Storage:

1. PPGI PVC Plastic Film Coveringshould be stored in neat and tidy environment to avoid possible corrosioncaused by all kinds of corrasive medium.
2. The ground for storage should be flat, without hard object, and with sufficient loading-bearing capacity.
3. Storage environment should be dry and ventilated. Avoiding storing outdoors or with dew or with wide temp difference.
4. Coil could not be dragged lest the burr caused by slicing will scratch the coil surface underneath.Coil should be handled with care, without hitting any hard object.

FAQ

Q1: Where is your warehouse located? How can I visit your company?

A1: Our warehouse is located in Tianjin, about 10min drive from our office.All our clients, from home or abroad, are warmly
welcome to take a visit here!

Q2: How does your company do regarding quality control?

A2: Quality is very important and always be put at the first place. SLM team members always pay great attention to quality
controlling from the very beginning to the end.

Q3: Can I get some samples?

A3: Yes, sure, we are honored to offer you samples, moreover we offer video online.

Q4: What is your method of Transportation?

A4: We deliver by shipping,container,break bulk or as your requirements.

Q5: What's your Payment method supported?

A5: We accept T/T, L/C at sight etc.