Ral9015 Color Coating Aluzinc Steel Coil

Color steel plate can be removed and then restored, can be easily assembled and disassembled, standard unit wall panels are interchangeable, for the maintenance of water and electricity, line transformation is very convenient.Ral9015 Color Coating Aluzinc Steel Coil

Send Inquiry→

Product Details

PRODUCT SPECIFICATION

Commodity	Color Coating Aluzinc Steel Coil
Standard	GBT2518-2008, ASTM A653, JIS G3302-1998, EN 10142-2000
Grade	SGCC, DX51D, DX53D, DX54D, Q195, Q235, Q345
Thickness	0.1mm-2.0mm
Width	600mm~1500mm
Length	According to customer requirements
Zinc coating	Z30--Z275. according to customers' requests
Surface Treatment	chromed, skin pass, oiled, unoiled, slightly oiled,dry

PRODUCT DETAILS

Ral9015 Color Coating Aluzinc Steel Coil

Clean up Color Coating Aluzinc Steel Coil most coating can be used as a solid lubricant, and can rest assured that most of the molding process of the wettability provisions, some industrial paint can be adjusted according to the secret development of coating wettability.If the coating wettability is not enough, according to the oil, wax, coating can be separated from the original film and other methods to develop the wettability.But attention should be paid to the simple absorption of wetting synovial fluid dirt, should be removed in front of the equipment.Can be removed from the original film in the end of the decoration project should also be removed as soon as possible.

PACKING

Ral9015 Color Coating Aluzinc Steel Coil

packing and shipping:

1. Inner side: By water proofed craft paper and plastic packing.

2. Outside: Covered by steel sheet and bundled the sheets on the steel pallet with steel strips.

3. We can also meet others sea worthy export standard packing as customers' request.

Properly packed for ocean freight exportation in 20' ' containers

TRANSPORTION

Ral9015 Color Coating Aluzinc Steel Coil

At present, the most mature and the most widely used coating method in the production of color coating board is roller coating, the process flow is the belt roller will take the coating out of the coating plate, after meshing with the coating roller, the coating from the belt roller to the coating roller, and then the coating roller will be coated on the surface of the pretreated steel plate, the surface.Some iron and steel company is in the production process of colour besmear board, discover in coating dish have a lot of bubble generation, this meeting causes very big effect to the quality of colour besmear board.This paper simulates the idling of the belt roller in the process of producing the paint plate, and studies the influence of the rotation speed of the belt roller, the amount of paint in the coating tray, the size of the coating tray, the position of the inlet and outlet, and the speed of the inlet on the froth and uniformity of the coating.

Certificate

Color Coating Aluzinc Steel Coil