bsp; Most popular in 2024 and high quality with galvanized Coil /PPGI Steel Coil specification

Standard	AISI, ASTM, GB, JIS
Material	SGCC,SGCH,G550,DX51D,DX52D,DX53D
Brand	Shandong Great Steel
Thickness	0.1-3.0mm
Width	600-1500 mm
Tolerance	+/-0.02mm
Zinc coating	40-600g/m2
Surface treatment	Until, dry, chromate passivated, non-chromate passivated
Spangle	Regular spangle,minimal spangle, zero spangle,big spangle
Coil ID	508mm/610mm
Coil Weight	3-8 tons
Technique	Hot rolled, cold rolled
Package	Standard seaworthy export packing: 3 layers of packing, inside is kraft paper, water plastic film is in the middle and outside GI steel sheet to be covered by steel strips with lock, with inner coil sleeve
Certification	ISO 9001-2008, SGS,CE, BV
MOQ	22 TONS (in one 20ft FCL)
Delivery	15-20 days
Monthly Output	30000 tons
Description	Galvanized steel is mild steel with a coating of zinc. The zinc protects the steel by providing cathodic protection to the exposed steel, so should the surface be damaged the zinc will corrode in preference to the steel. Zinc steel is one of the most widely used products, used extensively in the building sector, automotive, agricultural and other areas where the steel needs to be protected from corrosion
Payment	T/T, LC, Kun Lun Bank,Western Union, Paypal
Remarks	Insurance is all risks and accepts the third-party test

Hot dip galvanizing: the molten metal reacts with the iron matrix to produce an alloy layer, so as to combine the matrix and the coating. Cold galvanizing: the amount of galvanizing is very small, only 10-50g / m2, and its corrosion resistance is much different from that of hot-dip galvanized pipe.
Galvanized coil
For galvanized coils, the sheet steel is immersed in a molten zinc bath to make a sheet of zinc coated on its surface. It is mainly produced by continuous galvanizing process, that is, the rolled steel plate is continuously immersed in a plating tank with zinc melted to make galvanized steel plate; alloyed galvanized steel plate. This kind of steel plate is also manufactured by hot dip method, but immediately after being out of the tank, it is heated to about 500 ºC to form an alloy coating of zinc and iron. This galvanized coil has good paint adhesion and weldability

Products